1. Your Roof and Roof Structure
2. OSB Boards are Attached to the Roof with Nails
3. Moisture Barrier Damp Balancer is Laid Over the OSB
4. 5×5 cm Battens are Fixed with Nails at the Peak of the Roof
5. 5×5 cm Battens are Fixed Horizontally on the OSB Boards with 37 cm Spacing
6. Vertical Battens are Fixed with Nails on the Horizontal Battens Only on the Sides
7. The Appearance of the OSB Battens is Complete
8. 5×10 cm Battens are Fixed with Nails at the Peak of the Roof
9. Metal Roof Tiles are Bent 3 cm at 90° and Fixed to the Side Batten with Nails
10. The Second Row of Metal Roof Tiles is Placed Under the First Row
11. The Gable is Fixed with Nails to the Lower Batten Where the Two Roof Tiles Overlap
12. The Ridges are Placed on the Side Eaves
13. The Side Eaves Ridge is Fixed to the Vertical Battens with Nails
14. Both Sides of the Roof are Fixed with the Side Eaves Ridge
15. The Battens at the Peak are Covered with a Round Ridge, Where the Other is Placed Over
16. All Battens are Covered in This Way
17. Installation of the Gutter
18. Gutters are Fixed to the Roof with Hidden Clips
19. Hidden Clips are Fixed to the Gable with 50 cm Spacing
20. Your Roof is Completed with the Battens System
21. The Combination Valley is Fixed with Nails Before the Roof Tiles are Laid
22. Combination Valley and Metal Roof Tiles are Installed
23. Flat Ridge is Applied by Nailing It onto the Battens with Overlap
24. Flat Ridge Installation is Complete